Visual inspection
Terminals, labeling, cable entries, IP protection rating, mechanical damage and warning markings.
DIN VDE 0105-100
Master-electrician business for safety technology, energy solutions, CAD design and 3D printing.
Consulting and practical support for manufacturers and operators of machinery.
Technical documentation, risk assessment and evidence in accordance with applicable standards.
Periodic inspections per DGUV Regulation 3, stopping-time measurement and further safety-related measurements. Details ↓
Safety assessment and optimization of machines, robots and handling systems.
ISO/IEC 17024-certified and tested by BDSF e.V.
Periodic inspections of electrical systems and equipment per DGUV Regulation 3 and DIN VDE 0105-100 – measurement, assessment and documentation from one source.
Terminals, labeling, cable entries, IP protection rating, mechanical damage and warning markings.
Measurement between PE terminal and touchable conductive parts with a test current ≥ 200 mA.
Measurement with 500 V DC. For drives fed by frequency converters, leakage current measurement applies.
Equivalent method for frequency converters and motors fed by frequency converters, measured under operating voltage.
L1/L2/L3 to PE, line-to-line voltage and phase symmetry.
Function test of tripping current and tripping time within the standard limits, type A and type B.
Interlocking of reversing contactors, drop-out time, mechanically forced guidance and testing of the safety shutdown.
Measurement of the stopping time of protective devices and calculation of safety distances.
Additional services by agreement.
We plan and build PV systems with Victron systems – from self-consumption to autonomous power supply. Carried out by a master-electrician business, tested and documented.
Sizing of PV capacity and storage according to consumption, roof area and goal – from self-consumption to autonomy.
Professional installation and wiring by the master-electrician business, including protection and grid connection.
Acceptance measurements and test reports according to applicable regulations, cleanly documented.
Monitoring of the system via Victron GX and VRM portal, remote access and support in case of faults.
From idea to finished part: we design what your plant needs and produce it by 3D printing – fast and precisely.
3D design of fixtures, brackets, grippers and plant components – tailored to your machine or robot cell.
Production drawings, bills of materials and 3D models for production, assembly and your technical documentation.
Measure existing parts, rework them or redesign them as spare parts.
FDM 3D printing: prototypes, functional samples and small series – e.g. gripper fingers, housings, brackets and adapters.
Short paths from design to printed part, also for changes during an ongoing project.
We print using the FDM process. This is our material range – we choose the suitable material depending on your requirement.
Fast, dimensionally accurate and inexpensive – ideal for prototypes, samples, fixtures and brackets.
PETG is tougher and more moisture-resistant than PLA – good for functional parts, housings and covers.
Elastic parts for dampers, seals, protective caps and soft gripper jaws.
Stiff and strong at low weight – for loaded brackets, fixtures and grippers.
Appearance and special applications: samples, demonstration models, labels.
For complex geometries, overhangs and cavities – cleanly removable or water-soluble.
Heat-, UV- and impact-resistant – for parts in plant use, outdoors and at higher temperatures.
For highest temperature and chemical resistance – particularly demanding components.
Material suitability depends on component, load and environment – we are happy to advise you on selection.